Door hinge adjustment for your log cabin
Your Lillevilla log cabin will require some adjustment to the door and window sets as the cabin naturally expands and contracts from season to season. This will be more apparent shortly after installation as the cabin settles initially under its own weight. Please find below a set by step guide on how to make these adjustments.
It is important to lift the doors or remove them to take the weight off the hinge whilst adjustments are made. Failure to do so will round off the adjustment point.
Adjustment points 1 & 3 (You will have only one of these types)
Adjustment 3 is located under the plastic top cap. These two adjustment points make the same adjustment and allow for the door to be raised and lowered within the frame set. Please ensure both upper and lower hinges are adjusted equally.
Adjustment points 2
Please loosen the screws located into the door. Adjustments shown as 2 are connected to packing plates at the back of the hinge. This adjustment moves the plate between the hinge and the door which in turn moves the doors closer together or further apart.